ModuleWorks, Zeiss Cooperate on CAD/CAM System
The goal is to provide an integrated conventional and ultra-precision machining software capable of programming the complex parts required in the optics industry.
Share
CAD/CAM software supplier ModuleWorks GmbH is partnering with Zeiss Industrial Metrology to develop a system that combines conventional CAM and the requirements of ultra-precision machining into a single CAD/CAM package. The goal is to develop new machining cycles toward an integrated process chain enabling optical parts to be machined using a single CAD/CAM system. Integrating all machining-relevant processes in a unified system is expected to accelerate process programming for cutting complex freeform surfaces and to improve the quality and cost-efficiency of producing ultra-precision parts.
Ultra-precision machining is used for parts that need to be machined to an accuracy of just a few micrometers and a roughnesses in the range of nanometers. Optical parts require both ultra-precision machining for the optically effective areas of the part and conventional machining for the non-optical areas. ModuleWorks says that currently there is no single CAD/CAM system that combines both of these types of machining.
The new system is powered by the ModuleWorks 64-bit optics kernel. The kernel is based on the company’s five-axis technology for toolpath generation and has been developed to meet the growing demand for high-precision machining of increasingly complex geometries in the optics industry. The ModuleWorks optics kernel supports multi-threading for fast, ultra-precision machining of optical parts such as lenses, molding tools and lens arrays. It supports grinding and diamond turning as well as grinding patterns for roughing, drilling, chamfering, slotting and contouring. The full 3D machine and material removal simulation software can also be applied to small cutting inserts.
Related Content
-
How Integrated CAD/CAM Transforms Inventions Into Products
The close connection between CAD and CAM is what links creative ideas to practical production for this unique custom manufacturer.
-
Five-Axis CAM Strategies Cut Cycle Time for Two Shops
After being acquired by the same parent company, two shops found that working together and sharing knowledge improved both of their bottom lines.
-
Bringing Machining In-House to Keep up With Demand for Offroading Parts
To meet demand increases for its Ford offroad industry components, supplier RPG Offroad brought its machining processes in-house, saving the company nearly $50,000 per month. Here’s how its choice of integrated CAD/CAM software made it happen.
