Broaching Tool Enables Single-Operation Serration on a Lathe
PMTS 2019: With Schwanog’s broaching tool, manufacturers of serrated turned parts can use a conventional lathe with C axis and eliminate the cleaning process.
Share
With Schwanog’s broaching tool, manufacturers of serrated turned parts can use a conventional lathe with C axis and eliminate the cleaning process that must usually come between turning and broaching. The broaching tool carries a quarter circle geometry with six teeth. Only the first tooth carries a complete (finish depth) profile, while the remaining five teeth are considered roughing teeth.
Broaching of serration is a two-step process. During the first step, the spindle does not move, and the broach feeds three times until the first tooth is completely established. During the second step, the spindle starts indexing and the five successive teeth are continuously broached until the finished depth is reached.
According to the company, the system saves on costs thanks to reductions in setup and part cycle times.
Related Content
-
Medical Shop Performs Lights-Out Production in Five-Axes
Moving to five-axis machining enabled this shop to dramatically reduce setup time and increase lights-out capacity, but success relied on the right combination of workholding and automation.
-
Five Common Mistakes Shops Make with ER Collets (And How to Prevent Them)
Collets play a crucial role in the machining process, so proper tool assembly and maintenance is important. Here are five potential pitfalls to avoid when using ER collets.
-
Shoulder Milling Cuts Racing Part's Cycle Time By Over 50%
Pairing a shoulder mill with a five-axis machine has cut costs and cycle times for one of TTI Machine’s parts, enabling it to support a niche racing community.