Multi-Spindle Machine Simultaneously Mills, Turns in Nine Axes
Absolute Machine Tools offers Quicktech’s high-precision S-32 ATM nine-axis, twin-spindle milling and turning center.
Share
Absolute Machine Tools offers Quicktech’s high-precision S-32 ATM nine-axis, twin-spindle milling and turning center. The system has nine axes in total, including two turning spindles and a 190-degree, B-axis milling spindle serviced by a 24-tool arm-type automatic toolchanger. Six fixed gang-type ID turning tools at the subspindle result in a total capacity of 30 tools.
Both the main spindle and subspindle feature 6,000-rpm, 5-hp, high-torque integral motors as well as 42-mm collet chucks (or 5", three-jaw hydraulic chucks) with capacity for 30-mm barstock. The spindles feature a continuous C axis with a braking system and are fully synchronized for fast and accurate part transfer.
The 10,000-rpm, 3-hp, HSK 40-taper B-axis milling spindle services both the turning main spindle and the subspindles. It has a working range of 190 degrees, ±95 degrees from vertical). The B axis is locked in position for rigid turning operations. The 24-tool ATC with an HSK 40-taper quick-change tooling system produces tool change times of only 1.3 sec. The subspindle moves in the X, Y and Z axes, and in the X axis it can move above and below the centerline to clear the B axis and enable full tilting capabilities. There are six gang-type turning tools at the subspindle that enable simultaneous turning and milling. Rigid tapping is standard.
The system employs P4 high-precision bearings for stability and heavy cutting. All major components are made of heavy Meehanite cast iron. The 35-mm Hiwin roller-type linear guideways in all linear axes provide stability and enable heavier machining. Substantial 32-mm ballscrews are double anchored, pre-tensioned and direct coupled to the machine’s servomotors.
The system is equipped with a Mitsubishi M830W control with a 19" LCD. All spindles and axes employ Mitsubishi AC servomotors and amplifiers.
Related Content
-
Inside the Premium Machine Shop Making Fasteners
AMPG can’t help but take risks — its management doesn’t know how to run machines. But these risks have enabled it to become a runaway success in its market.
-
Quick-Change Tool Heads Reduce Setup on Swiss-Type Turning Centers
This new quick-change tooling system enables shops to get more production from their Swiss turning centers through reduced tool setup time and matches the performance of a solid tool.
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.