Three-Jaw Pneumatic Chuck Holds Round Workpieces
Samchully Workholding’s MCA pneumatic chuck is a three-jaw stationary chuck designed to hold round workpieces in a machining center or mounted on a tombstone.
.jpg;width=70;height=70;mode=crop;format=webp)
Share
Samchully Workholding’s MCA pneumatic chuck is a three-jaw stationary chuck designed to hold round workpieces in a machining center or mounted on a tombstone. One chuck can be installed on a milling machine and operated separately, or multiple chucks can be mounted on a plate and actuated together. The chuck operates via standard shop air pressure, and a safety valve system prevents workpiece release in the case of a failure of the pneumatic system.
The power chuck can be used with standard serrated soft or hard jaws or can be fitted with application jaws as required. Threaded holes on the face enable mounting locators or fixtures, and a small through-hole can be used as an air blast for clearing chips off the workpiece. MCA chucks are available in 4", 6", 8" and 10" sizes.
Related Content
-
Workholding Fixtures Save Over 4,500 Hours of Labor Annually
All World Machinery Supply designs each fixture to minimize the number of operations, resulting in reduced handling and idle spindle time.
-
Lean Approach to Automated Machine Tending Delivers Quicker Paths to Success
Almost any shop can automate at least some of its production, even in low-volume, high-mix applications. The key to getting started is finding the simplest solutions that fit your requirements. It helps to work with an automation partner that understands your needs.
-
Custom Workholding Shaves Days From Medical Part Setup Times
Custom workholding enabled Resolve Surgical Technologies to place all sizes of one trauma part onto a single machine — and cut days from the setup times.
