Tungaloy Grooving Toolholders Provide Highly Stable Machining
TungHeavyGroove includes an enhanced insert clamping design for maximum tool rigidity.
Share
Tungaloy-NTK America Inc.’s TungHeavyGroove grooving inserts and toolholders are designed for heavy-duty and wide-profile grooving applications. TungHeavyGroove introduces an enhanced insert clamping design for maximum tool rigidity. It includes inserts in widths of 10, 15, 20 and 25 mm.
New SHER-CHP toolholders incorporate durable features that enhance the tool reliability. The toolholder supports the insert underneath its cutting edge, contrary to the conventional toolholders, which offer no support directly under the cutting edge. This provides the insert with extra security in sustaining heavy cutting loads during machining. The toolholders feature a reinforced design offers multiple contact faces, maximizing contact with the machine turret or tool post and resulting in significantly higher stability and rigidity compared to conventional toolholders, the company says.
The new TungHeavyGroove toolholders utilize a frontal coolant system, delivering high-pressure cutting fluid from the bottom to the flank face of the cutting edge. This design enhances chip evacuation and extends insert tool life significantly. Furthermore, an extremely rigid dovetail insert clamping method sustains heavy cutting loads during aggressive wide grooving and profile grooving, while providing process security.
Ten new inserts are introduced in total, including two geometries. HGM grooving inserts incorporate a pressed-in chip former and are available in versatile AH8015 grade or T9215 grade optimized for high speed machining of steel. HBL inserts are available as blanks so that users can tailor them into customer-specific groove forms of up to 6.6 mm (0.260″) depth of cut. HBL is made from TH10 uncoated carbide grade.
16 new square shank toolholders are introduced in both metric and imperial sizes with shank heights and widths of 25 × 25, 32 × 32, and 40 × 40 mm for metric sizes and 1″ × 1″, 1 ¼″ × 1 ¼″, and 1 ½″ × 1 ½″ for imperial sizes.
Related Content
-
Through-Coolant System Cuts Nickel-Alloy Cycle Times by 70%
Decker Machine Works recently adopted Rego-Fix’s reCool through-coolant system for ER collets, reducing the cycle times on a nickel alloy job by 70%.
-
Jergens Pull Studs Enable Quick Changeovers
SP140 and K02 pull studs offer quick-change solutions for vise or gripper jaws, electronic component manufacturing, packaging machines, medical technology and automation.
-
PowRgrip Responds to Three Tooling Trends
Rego-Fix’s PowRgrip tooling system has expanded over the past 20 years to incorporate a wider range of tool sizes, as well as automation.