End Mill Comparisons in CFRP, Part 1 - Carbide Tool
Video shows the performance of coated carbide, diamond-coated, PCD and veined PCD tools in carbon fiber reinforced plastic. Part one in a four-part series.
Share
Smith MegaDiamond Inc. and Star Cutter Company compared the performance of various end mills in carbon fiber reinforced plastic (CFRP). The tools tested included a coated carbide end mill, a diamond-coated end mill, a conventional PCD end mill with straight flutes, and a “veined” PCD end mll featuring a vein of PCD within a helical slot in a carbide tool body.
The table below summarizes the test parameters. Shown here is the video of a 30-degree helical coated carbide tool. Jeff Michael, engineering manager for Star Cutter, comments, “The sound is pretty good for this cutter. It appears to be cutting well until the second pass, where there are visible uncut fibers after just a few feet of cutting.”
To see the next video in this testing, click here.
|
|
Tool Type |
|||
|
Ø .500 in. |
Solid Carbide |
CVD Diamond |
PCD |
Veined PCD |
|
Flute angle |
30° helical |
10° helical |
7° skew |
30° helical |
|
Spindle speed (rpm) |
3,000 |
4,600 |
12,000 |
18,000 |
|
Chip load (in./tooth) |
0.0035 |
0.0035 |
0.001 |
0.0065 |
|
Machine advance (in./min.) |
42 |
64 |
36 |
470 |
|
Radial depth (in.) |
.050 |
.050 |
.050 |
.050 |
Cutting speeds and feed rates were recommended parameters from each tool’s manufacturer.
Editor’s note: To read the next part in the series, click here.
Related Content
-
Orthopedic Event Discusses Manufacturing Strategies
At the seminar, representatives from multiple companies discussed strategies for making orthopedic devices accurately and efficiently.
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
-
Custom PCD Tools Extend Shop’s Tool Life Upward of Ten Times
Adopting PCD tooling has extended FT Precision’s tool life from days to months — and the test drill is still going strong.
