Finishing A Pocket Floor In Titanium
Machining animation from Boeing illustrates effective techniques for titanium workpieces. This simulation also shows finishing of the floor of the pocket.
Share
Like the previous simulation in this series, this machining simulation provided by Boeing Research and Technology (using CGTech software) shows roughing followed by material removal from the corners prior to finishing. The finishing of the walls is performed with fast passes at successive layers.
This simulation also shows finishing of the floor of the pocket. Note how the tool radiates out from the center of the pocket to the wall. This keeps unmachined stock always adjacent to the cut for support. No section of the floor is ever touched again after it has been machined once.
Find details in the articles at right. Or, see other videos in this series:
1. Video: Finishing Walls In Titanium
2. Video: Finishing A Pocket Floor In Titanium
3. Video: Plunge-And-Sweep For Finishing Corners
Ìý
Related Content
-
Ceratizit Product Update Enhances Cutting Tool Solutions
The company has updated its MaxiMill 273-08 face mill, WPC – Change Drill, as well as the HyPower Rough and HyPower Access 4.5-degree hydraulic chucks.
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
-
Sandvik Coromant Milling Tool Boosts Productivity in Steel Machining
CoroMill MR80 is designed for challenging roughing operations in a wide range of face and profile milling applications in steel and stainless steel.