Video: 56-Percent Productivity Increase By Reducing Chatter
The video compares a milling pass that chatters to one that is stable. Because the stable speed permits greater depth of cut, productivity increases.
Share
This video shows what chatter sounds like, and also what a stable cut sounds like. Chatter is the result of machining at a speed that is not stable for that particular combination of machine, toolholder and tool. BlueSwarf and Manufacturing Laboratories Inc. provided this video; these companies offers technology for identifying these inherently stable speeds for a particular setup. In the example shown, the chatter at 16,000 rpm limits depth of cut. However, finding a specific, inherently stable speed (in this case, 14,144 rpm) permits greater depth of cut. As a result, the slower spindle speed actually permits greater productivity.
Related Content
-
Medical Shop Performs Lights-Out Production in Five-Axes
Moving to five-axis machining enabled this shop to dramatically reduce setup time and increase lights-out capacity, but success relied on the right combination of workholding and automation.
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
-
Five Common Mistakes Shops Make with ER Collets (And How to Prevent Them)
Collets play a crucial role in the machining process, so proper tool assembly and maintenance is important. Here are five potential pitfalls to avoid when using ER collets.