-
SPONSORED
-
SPONSORED
-
-
Tooling
Drills Feature Replaceable Cartridge Design
 The Revolution drill features a replaceable cartridge design allows users to adjust diameters up to 0. 200" (5. 1 mm), eliminating the need for specials or subsequent boring operations.
Read MoreExpanded Selection Of Tooling Adapters
Thinbit, manufactured by Kaiser Tool Company, has expanded its selection of adapters for the Mini-Bore, Microbit and MiniGroove ‘N Turn tooling lines. The new adapters are available with 3/4" and 1" ODs and 1/8", 3/16", 1/4", 5/16", 3/8" and 1/2" IDs. .
Read MoreDurable Steel Toggle Clamps
 The company introduces a variety of toggle clamps with safety locks. Latch-action toggle clamps are available in five sizes ranging from 360- to 7,500-lbs capacity. All are equipped with a threaded U bolt for adjustability and a matching latch plate.
Read MoreSafety Collet Clamping System
The ER Zeta safety collet clamping system from Zollmann GmbH offers a unique profile that allows for various mounting adapters or spanner wrench to be screwed on by means of a bayonet-style locking feature. The system is suited for use in tight areas. The collet nuts offer a high clamping torque that reduces overall runout.
Read MoreTapping Holder Improves Thread Quality And Tap Life
 The Mega Synchro tapping holder compensates for synchronization error during rigid tapping by reducing the thrust load to both the tap and workpiece, improving thread quality and tap life. This is facilitated through a mechanism that absorbs the pitch difference between the tap and synchronous spindle. Capable of supplying coolant through slits to the tap periphery, the holder is available in various lengths and spindle interfaces to suit any company’s needs.
Read MoreKeep Tools In Place With High Loads
 The SafeLock system combines the advantages of a shrink-fit chuck with those of a positive connection by integrating ball or pin drivers into the chuck. Those drivers grip into helical grooves that are ground into the cutter shank in the opposite direction of the cutting forces. The shape of the groove ensures that the tool is simultaneously safeguarded against spinning and against being pulled out when confronted with radial and axial cutting forces.
Read MoreDeburring System Features Return-To-Operator System
 The company has expanded its Tri-Ten planetary head deburring system to include a return-to-operator (RTO) configuration. The series is designed to deburr both sides of a part in a single pass. Parts are loaded at one end and a magnetic conveyor passes them through an offset planetary deburring head where three fiber abrasive brushes deburr the upward-facing surface.
Read MoreFeed System Automates Production
According to the manufacturer, the advanced feed system allows companies to increase productivity, decrease setup time, reduce operator error and virtually eliminate waste. The feed system can turn a semi-automatic machine into a fully automatic production machine. Operators can either manually enter dimensions into the controller or pull a cut list directly from the controller.
Read MoreHigh Clamping Force Toolholder
The powRgrip PG system uses a toolholder and collet to generate high clamping forces while maintaining a TIR of less than 0. 0001", the company says. The system is said to be ideal for high speed machining applications, and it can clamp tool shanks ranging to 1" in diameter.
Read MoreRapid Response Hydraulic Power Unit Program
The company says it can build, paint, test and ship custom hydraulic units in 3 days or less to anywhere in the world using its rapid response hydraulic power unit program. Both vertical- and horizontal-style units are available and range in size from 2 to 50 gallons. The 15-hp (maximum) units can deliver as much as 15 gpm at pressures ranging to 3,000 psi.
Read More